Gypsum plasterboard石膏板

EN 520:2004 石膏板定义、要求和试验方法 Gypsum plasterboard-Definitions, requirements and test methods

5.2 Width EN 520宽 
5.3 Length EN 520长 
5.4 Thickness EN 520厚 
5.5 Squareness of ends EN 520斜角尺寸 
5.6 Edge and end profiles EN 520锥形尺寸 
5.7 Flexural strength EN 520弯曲强度 
5.8 determination under load EN 520一定载荷下的形变 
  Reaction to fire EN 13501-1防火性能 
  Acoustic absorption EN ISO 354吸音 
  Thermal resistance EN 12664热阻 
5.9.1 Surface water absorption EN 520表面吸水 
5.9.2 Total water absorption EN 520总吸水 
5.11 Density EN 520密度 
5.12 Surface hardness of the board EN 520表面硬度 

BS EN 13950:2005 隔热/隔音复合石膏板.定义、要求和试验办法 Gypsum plasterboard thermal/acoustic insulation composite panels — Definitions, requirements and test methods 

4.2.1 Reaction to fire EN 13501-1防火性能 
4.2.2 Fire  resistance EN 13501-2耐火性能 
4.4 Flexural strength EN 520弯曲强度 
4.5 Impact resistance ISO 7892耐冲击                                 
4.6 Direct airborne sound insulation EN ISO 140-3 prEN ISO 140-16直接空气隔声                         
4.7 Acoustic absorption EN ISO 354吸音 
4.8 Thermal resistance EN 12667热阻 
4.9 Dimensions and tolerances EN 520尺寸及公差                       
Width EN 520宽 
Length EN 520长 
Thickness EN 520厚 
4.1 Offset EN 13950偏移 
4.11 Flatness of the composite EN 825复合板的平整度                   
4.12 Adhesion/cohesion of the insulating material EN 13950与绝缘材料的结合力 
4.13 危险物质 EN 520Dangerous substances 

ASTM C 1396-06 石膏板标准规范 Standard Specification for Gypsum Board 

1 thickness ASTM C 473厚 
2 Width ASTM C 473宽 
3 length ASTM C 473长 
4 End Squareness ASTM C 473斜角尺寸 
5 Recessed-or Tapered Edge Depth ASTM C 473锥形尺寸 
6 Flexural Strength (A,B) ASTM C 473弯曲强度 
7 Core ,End and Edge Hardness(A,B) ASTM C 473硬度 
8 Nail Pull Resistance (A,B) ASTM C 473耐刻性 
9 Humidified Deflection ASTM C 473受潮性 
10 Water Resistance of Core-Treated    Water-Repellent Gypsum Panel Products ASTM C 473防水性 
11 Surface Water Restistance of Gypsum Panel Prodects with Water-Repellent surfaces ASTM C 473表面防水 

AS/NZS 2588：1998 石膏板 Gypsum Plasterboard 

6.1 Thickness AS/NZS 2588厚 
6.2 Width AS/NZS 2588宽 
6.3 Length AS/NZS 2588长 
6.4 Squareness AS/NZS 2588斜角尺寸 
7 Edge Finish AS/NZS 2588锥形尺寸 
9.1.2 Bending Strength(A,B) AS/NZS 2588弯曲强度 
9.1.4 Nail Pull Resistance AS/NZS 2588耐刻性 
9.1.6 Humidified Deflection(A,B) AS/NZS 2588受潮性 
9.1.3 edge hardness AS/NZS 2588边缘硬度 
9.1.5 bond strength AS/NZS 2588结合强度 
21 Water Resistance ASTM C 473防水性 
21 Surface Water Restistance ASTM C 473表面防水 

ISO 6308-1980 熟石膏板规范 Gypsum plasterboard-Specification 

1 Width ISO 6308宽 
2 Length ISO 6308长 
3 Thickness ISO 6308厚 
4 Taper profile ISO 6308锥形尺寸 
5 Breaking load ISO 6308破坏荷载 
 

Mineral wool (MW) products  建筑矿棉板

BS EN 13162:2001 建筑物用隔热产品.工厂制矿棉制品.规范 Thermal insulation products for buildings -Factory made mineral wool (MW) products -Specification

1 Thermal resistance and thermal conductivity EN 12667热阻及传导 
2 Length and width EN 822长和宽 
3 Thickness EN 823厚 
4 Squareness EN 824斜角尺寸 
5 Flatness EN 825平整度 
6 Dimensional stability EN 1604尺寸稳定性 
7 Tensile strength parallet to face EN 1608(平行拉伸强度)             
8 Reaction to fire EN 13501-1防火 
9 Compressive stress or strength EN 826抗压强度 
10 Point load EN 12430集中荷载 
11 Short term water absorption(A) EN 1609短时吸水率 
12 Long term water absorption(1A) EN 12087长时吸水率 
13 Thickness EN 12431厚度缩减 
14 Sound absorption EN ISO 354吸音性 
15 Release of dangerous substances refer to EN 717-3有害物质释放量 
 

Fiber-Cement Flat Sheet  纤维水泥平板材

ASTM C 1185-08 无石棉的纤维水泥平面薄板、屋面板、墙面板和护墙板取样和测试用标准试验方法 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet,Roofing and Siding Shingles,and Clapboards

1 Width ASTM C 1185宽 
2 Length 长 
3 Thickness 厚 
4 Edges Straightness 垂直度 
5 Edges Squareness 斜角尺寸 
6 Flexural Strength(wet condition,equilibrium condition) ASTM C 1185弯曲强度(潮湿状、室温状) 
7 Density ASTM C 1185密度 
8 Moisture Movement ASTM C 1185水分移动 
9 Water Absorption ASTM C 1185吸水性 
10 Moisture Content ASTM C 1185含水率 
11 Water Tightness ASTM C 1185透水性 
12 Warm Water ASTM C 1185热水 

13 Freeze/Thaw ASTM C 1185冻融循环

BS EN 12467:2004 纤维水泥平板材,产品规范和试验方法  Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet,Roofing and Siding Shingles,and Clapboards

7.2.3.1 Width BS EN 12467宽 
7.2.3.1 Length BS EN 12467长 
7.2.3.2 Thickness BS EN 12467厚 
7.2.3.3 Straightness of edges BS EN 12467边直度 
7.2.3.4 Squareness of edges BS EN 12467边方度 
7.3.1 Apparent density BS EN 12467表观密度 
7.3.2 Bending strength(wet condition,ambient condition) BS EN 12467弯曲强度(潮湿状、室温状) 
7.3.3 Water impermeability for Categories A,B,D BS EN 12467水渗透性 
7.4.1 Freeze-thaw for Categories A,B,D BS EN 12467冻融循环 
7.4.2 Heat-rain for Categories A,B BS EN 12467耐候(湿热) 
7.3.6 Soak-dry for Categories BS EN 12467干湿循环 
7.5 Reaction to fire EN 13501-1防火 
7.3.5 Warm water BS EN 12467热水性能 
8 Marking,labelling and packaging BS EN 12467标记 
 

Plywood  胶合板

AS/NZS 2269:2004 结构胶合板 Plywood-structural

1.6.1 Dimensions AS/NZS 2098.4(Thickness,Length,Width) 尺寸(厚度、长度和宽度) 
1.6.2 Squareness AS/NZS 2098.4垂直度 
Edge straightness AS/NZS 2098.4边直度 
Flatness AS/NZS 2098.4翘曲度 
1.7 Moisture content AS/NZS 2098.1含水率 
1.11 Branding 商标 
3.2 Bonding of scarf joints 接口胶合质量 
3.2.1 Bond quality(Type 1) AS/NZS 2098.3胶合质量 
3.2.2 Bond stength(Type 2) AS/NZS 2098.3胶合强度 
3.3 Bond quality(Type A) AS/NZS 2098.2胶合质量 
4.4 In-grade 30pcs性能测试 
4.4.1 Bengding strength AS/NZS 2098.9弯曲强度 
4.4.2 Modulus of elasticity AS/NZS 2098.9弹性模量 
4.4.3 Tension strength AS/NZS 2098.9拉伸强度 
4.4.4 Panel shear strength AS/NZS 2098.9剪切强度 
4.4.5 Compression strength AS/NZS 2098.9抗压强度 
Additional tests 附加测试 
1 Density AS/NZS 2098.7密度 AS/NZS 2098.7
2 Resistance of gluelines to attack by micro-organisms AS/NZS 2098.5胶层抗微生物性 AS/NZS 2098.5
3 Depth of peeler check AS/NZS 2098.6去皮深度 AS/NZS 2098.6
4 Water absorption and AS/NZS 2098.8thickness swelling 吸水率和厚度膨胀率 AS/NZS 2098.8

EN 13986:2004 建筑用木基板—特性，合格评价及标记  Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking 

5.1 Bending strength EN 310弯曲强度 (A-EN 789)
5.2 Bending stiffness EN 310(Modulus of elasticity) (A-EN 789)弯曲硬度(弹性模量) 
5.3 Bond quality EN 314胶合质量 
5.4 Internal bond EN 319(Tensile strength） 内部结合力(拉伸强度) 
5.5 Durability(Swelling in thickness) EN 317耐久性（浸水厚度膨胀率） 
5.6 Durability(Moisture resistance) EN 321耐水性 (EN1087-1)
5.7 Release of formaldehyde EN 717-1甲醛释放量 
5.8 Reaction to fire EN 13501-1防火性 
5.9 Water vapor permeability EN ISO 12572水汽渗透 
5.1 Airborne sound insulation EN ISO 140-3隔声性能 (Classifid by EN ISO 717-1)
5.11 Sound absorption EN ISO 354吸声性能 
5.12 Thermal conductivity EN 12664导热性 
5.13 Strength and stiffness for structural use EN 789结构用强度及硬度测试 
5.14 Impact resistance for structural use EN 1195结构用抗冲击性能 (EN12871)
5.15 Stength and stiffness under point load for structural use EN 1195结构用在点负载下的强度及硬度测试 (EN12871)
5.16 Mechanical durability ENV 1156机械耐久性 
5.17 Biological durability EN 335抗生物侵袭危险 
5.18 Content of pentachlorophenol CHEM五氯苯酚的含量 

EN 636:2003 胶合板－规范  Plywood - Specifications 

5.1 Tolerances on dimensions EN 315尺寸公差 
5.2 Mechanical characteristics 机械性能 
5.2.1 General EN 310普通性能 
5.2.2 Structural application EN 1058结构 
5.3 Formaldehyde release EN 717-1甲醛释放 
6 Requirements for plywood for use in dry conditions  EN 636-1 干燥环境用胶合板的要求        EN 636-1 
6.1 Bonding quality EN 314-2胶合质量 
6.2 Biological durability EN 335-3抗生物侵袭 
7 Requirements for plywood for use in humid conditions EN 636-2 潮湿环境用胶合板的要求EN 636-2 
7.1 Bonding quality EN 314-2胶合质量 
7.2 Biological durability EN 335-3抗生物侵袭 
8 Requirements for plywood for use in exterior conditions EN 636-3 室外用胶合板的要求EN 636-3 
8.1 Bonding quality EN 314-2胶合质量 
8.2 Biological durability EN 335-3抗生物侵袭 
9 Supplementary properties 增加的性能测试 
Physical properties 物理性能 
－Dimensional changes EN 318—尺寸变化 
—Moisture content EN 322—含水量 
—Density EN 323—密度 
Mechanical properties 机械性能 
—Tension properties EN 789—拉伸性能 
—Shear properties EN 789—剪切性能 
—Compression properties EN 789—压缩性能 
—Resistance to withdrawal of fasteners EN 13446—握钉力性能 
Performance properties 使用性能 
—Flooring EN 1195—地板 
—Floating floors CEN/TS 13810-2—浮式地板 
—Walling EN 594 or EN 596—墙板 
—Roofing EN 12871—屋顶 
—Duration of load and creep factors ENV 1156—保载及蠕变因素 
Other properties 其它性能 
—Classification by surface appearance & Ability for finishing EN 635-5—表观分级 & 工艺能力 
 

Fibreboards纤维板

EN 622-1 纤维板—规范—第一部分：一般要求  Fibreboards - Specifications - Part 1: General requirements 

1 Thickness EN 324-1厚度 
2 Length and Width EN 324-1长度和宽度 
3 Squareness tolerances EN 324-2直角度 
4 Edge straightness EN 324-2边直度 
5 Moisture content EN 322含水量 
6 Tolerance on mean density within a panel EN 323同一面板内的平均密度偏差 
7 Formaldehyde potential EN 120 or  717-1甲醛释放量 
8 Marking 标记 

EN 622-2 纤维板—规范—第二部分：硬木板的要求 Fibreboards - Specifications - Part 2: Requirements for hardboards 

1 Swelling in thickness 24h EN 31724小时浸水厚度膨胀 
2 Internal bond EN 319内结合强度 
3 Bending strength EN 310抗弯强度 
4 Modulus of elasticy in bending EN 310弯曲弹性模量 
5 Internal bond after boil test EN 319 EN 1087-1煮沸后的内结合强度 
6 Marking 标记 

EN 622-3 纤维板—规范—第三部分：中密度板的要求 Fibreboards - Specifications - Part 3: Requirements for medium boards 

1 Swelling in thickness 24h EN 31724小时浸水厚度膨胀 
2 Internal bond EN 319内结合强度 
3 Bending strength EN 310抗弯强度 
4 Modulus of elasticy in bending EN 310弯曲弹性模量 
5 Internal bond after boil test EN 319 EN 1087-1煮沸后的内结合强度 
6 Bending strength after boil EN 310 EN 1087-1煮沸后的抗弯强度 
7 Marking 标记 
Requirements for diffierent use 不同用途要求 分类 
a General purpose boards for use in dry conditions 干燥环境用普通板材 
b General purpose boards for use in humid conditions 潮湿环境用普通板材 
c General purpose boards for use in exterior conditions 室外环境用普通 
d Load-bearing boards for use in dry conditions 干燥环境用承重板材 
e Heavy-duty load-bearing boards for use in dry conditions 干燥环境用重型承重板材 
f Load-bearing boards for use in humid conditions 潮湿环境用承重板材 
g Heavy-duty load-bearing boards for use in humid conditions 潮湿环境用重型承重板材 

EN 622-4 纤维板—规范—第四部分：软质纤维板的要求 Fibreboards - Specifications - Part 4: Requirements for softboards 

1 Swelling in thickness 24h EN 31724小时浸水厚度膨胀 
2 Internal bond EN 319内结合强度 
3 Bending strength EN 310抗弯强度 
4 Modulus of elasticy in bending EN 310弯曲弹性模量 
5 Internal bond after boil test EN 319 EN 1087-1煮沸后的内结合强度 
6 Bending strength after boil EN 310 EN 1087-1煮沸后的抗弯强度 
7 Marking 标记 

EN 622-5 纤维板—规范—第五部分：干加工中密度板（MDF）的要求 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) 

1 Swelling in thickness 24h EN 31724小时浸水厚度膨胀 
2 Internal bond EN 319内结合强度 
3 Bending strength EN 310抗弯强度 
4 Modulus of elasticy in bending EN 310弯曲弹性模量 
5 Internal bond after boil test EN 319 EN 1087-1煮沸后的内结合强度 
6 Bending strength after boil EN 310 EN 1087-1煮沸后的抗弯强度 
7 Marking 标记 

BS EN 13377:2002 预制的木模板梁.－要求、分类和评定 Prefabricated timber formwork beams - Requirements, classification and assessment 

A.2.2.1 抗剪测试 EN 13377:2002Shear Resistance 
A.2.2.2 抗弯测试 EN 13377:2002Bending Resistance 
A.2.2.3 承载测试 EN 13377:2002Bearing Resistance 
A.3 弯曲硬度 EN 13377:2002Bending Stiffness 
Remark 样品规格针对20cm高的样品，其它尺寸需事先咨询。 
Remark Sample size is for 20cm-height sample, please inquire in advance if samples are of other size.